Can I Run Battlefield 6 on My PC / Laptop?

Both the minimum and recommended tiers list the same 16 GB, so yes, it covers you at either level. Only the Ultra tier bumps that to 32 GB, mostly for smoother texture streaming on the biggest maps at high settings.

The minimum tier lists 55 GB with no drive type specified, but the recommended and Ultra tiers both point at an SSD with roughly 90 GB free. A NVMe drive is the better choice, since it keeps map streaming and destruction effects from stalling on the biggest Conquest maps.

About 55 GB at minimum, growing to around 90 GB once you're targeting the recommended or Ultra tier with higher-quality textures installed.

128-player Conquest maps push Battlefield 6 into a CPU bottleneck. Testing shows GPU usage sitting around 60 to 70 percent while the CPU runs near 100 percent tracking every player, bullet, and destruction event on the map. A faster CPU, not a faster GPU, is the fix in that specific situation.

No. The developers chose not to include it, on this game or in the future, and put that performance budget toward frame rate instead. Don't expect an RT toggle to show up in a later patch.

DLSS 4, AMD FSR 4, and Intel XeSS 2, plus DLSS Frame Generation and Multi Frame Generation on supported RTX cards. Since there's no ray tracing competing for your GPU budget, Quality-mode upscaling is close to a free frame rate boost here.

Yes, for everything, including the single-player campaign. It stays connected to EA's servers even when you're not in multiplayer, so a dropped connection can interrupt solo play too.

Yes, and on PC it is on by default with no option to disable it. Console players can toggle it off in settings, though disabling it on one console still matches you against the other console platform.

No, the game runs uncapped by default and supports high refresh rate monitors up to 240 Hz plus 21:9 and 32:9 ultrawide. Whether you actually hit those numbers depends on your CPU as much as your GPU, especially in 128-player modes.

It's an unofficial fourth tier above Ultra, built around an RTX 5080 with a Ryzen 7 9800X3D or Core Ultra 9 285K, aimed at 4K 144 fps on high settings or 4K 240 fps on ultra settings using DLSS 4 Multi Frame Generation. Most players will never need to chase it.

If you mostly play smaller modes or the campaign, a GPU upgrade helps most. If you play 128-player Conquest and see stutters with GPU usage well under 100 percent, your CPU is the bottleneck, and a chip with a large cache, like AMD's X3D line, tends to help the most in this specific game.

An outdated GPU driver is the top suspect, followed by Secure Boot switched off in your BIOS, which the Javelin anti-cheat demands, and a corrupted install after a patch. Update the driver, flip Secure Boot back on, then verify your game files through the launcher before trying anything more involved.

Yes. The Javelin anti-cheat checks for Secure Boot at launch and the game will not start without it. This is also the reason it currently locks out Steam Deck and other Linux-based systems, since Proton has no way to satisfy that check.

Below spec. The RTX 3050 does not clear Battlefield 6's minimum, so plan for low settings, low fps, or a game that will not boot. Close to minimum-tier performance. Around 45 to 55 fps at 1080p low to medium.

Realistically, no. The GTX 1650 is beneath Battlefield 6's minimum, which means very low settings and a rough frame rate at best. Below the official minimum. Around 25 to 35 fps at 1080p low, and you'll want to drop resolution scale too.

Probably not worth it. The GTX 1060 6GB is short of Battlefield 6's minimum, so even very low settings may not give a smooth result. Below the official minimum. Expect roughly 35 to 45 fps at 1080p low, and worse in big Conquest fights.

Probably not worth it. The RX 580 is short of Battlefield 6's minimum, so even very low settings may not give a smooth result.

Easily. With the RTX 4060 you are past Battlefield 6's recommended tier, which means high settings at 1080p and a genuine shot at 1440p. Around 90 to 100 fps at 1080p high natively, up to about 117 fps with DLSS 4 Quality.

Plenty of power here. The RTX 3060 is above Battlefield 6's recommended tier, so high 1080p is smooth and 1440p is a fair target. Around 70 to 90 fps natively at 1080p high, close to 99 fps with DLSS 4 Quality on.

You can play it. The RTX 2060 is at Battlefield 6's minimum, so keep to 1080p low to medium and lower a setting if it stutters. Meets the official minimum, around 55 to 65 fps at 1080p on low to medium settings.

Probably not worth it. The GTX 1660 is short of Battlefield 6's minimum, so even very low settings may not give a smooth result. Below the official minimum but closer to playable. Around 35 to 45 fps at 1080p low.

That card falls short. The GTX 1660 Super is under Battlefield 6's minimum, which leaves you very low settings and a shaky frame rate.

Realistically, no. The RX 6600 is beneath Battlefield 6's minimum, which means very low settings and a rough frame rate at best. Below the recommended tier. Around 60 to 75 fps at 1080p medium to high.

Not recommended. Running Battlefield 6 on the GTX 1660 Ti means very low settings and low frame rates, and it may refuse to launch.

Yes. On the RTX 3060 Ti, Battlefield 6 runs at high settings in 1080p and scales up to 1440p without much fuss. The official recommended-tier card. Around 85 to 100 fps at 1080p high, and roughly 65 to 75 fps at 1440p high.

Yes, though keep expectations modest. The RTX 4050 clears Battlefield 6's minimum, so plan on 1080p at low to medium and trim a setting or two for a steady frame rate.

No, not comfortably. The GTX 1050 Ti misses Battlefield 6's minimum bar, so any session would be very low settings and low fps.

Yes, with room to spare. Battlefield 6 recommends less than the RTX 4070 offers, so expect smooth 1080p high and a playable 1440p. Over 130 fps at 1080p high, and roughly 90 to 100 fps at 1440p.

Apple never got a native build of Battlefield 6. Cloud streaming or a Windows setup gets you there instead, since an M-series chip alone can't launch it.

No. Integrated graphics sit below the RTX 2060 and RX 5600 XT minimum, so you need a dedicated graphics card.

No, on any of them. Battlefield 6 requires the Javelin anti-cheat's kernel-level Secure Boot check, which Proton cannot satisfy, so the game will not launch on Steam Deck, ROG Ally, Legion Go, or any other SteamOS or Linux handheld. This is a launch-time hard block, not a performance issue.

1440p at 60 fps is realistic on a recommended-tier card like an RTX 3060 Ti or RX 6700 XT. 4K at 60 fps officially wants Ultra-tier hardware like an RTX 4080 or RX 7900 XTX, and 4K at high refresh rates needs an even stronger card like an RTX 5080.

An RTX 3060 or similar clears 60 fps at 1080p high without much trouble. For 1440p at 60, look at an RTX 3060 Ti, RX 6700 XT, or better, and keep an eye on your CPU in 128-player modes since that's often the real limiter.

PS5 only. There is no PS4 version, unlike some earlier Battlefield games. The PC version this page covers is the more configurable option.

On big multiplayer maps it's usually a CPU bottleneck rather than a GPU one: watch your GPU usage, and if it's well under 100 percent while frames drop, your processor is the limiter. Lower Mesh Quality, Shadow Quality, Volumetrics, and Effects Quality first, since those scale with player count and destruction rather than resolution.

Not on PC, where it's always on. Console players can toggle it off, though doing so on PS5 or Xbox Series X/S still matches you with players on the other console, just not PC.

Yes, 21:9 and 32:9 are both supported, alongside uncapped frame rates and refresh rates up to 240 Hz on the display side. Hitting those numbers still comes down to your CPU as much as your monitor.

No. Battlefield 6 requires its Javelin anti-cheat to verify Secure Boot at launch, and Proton has no way to satisfy that check, so the game refuses to start on Steam Deck, other SteamOS devices, or any Linux distro. This is a hard block at launch, not a performance limitation, so no settings tweak or Proton build gets around it. Until the developers add Linux support to Javelin, Battlefield 6 stays Windows only.

Yes, on both, but there is no Xbox One version. The PC version this page covers offers more graphics settings and higher frame rate ceilings than either console.

Set everything to the RTX 2060, i5-8400, 16 GB floor and smaller modes hold around 55 to 65 fps at 1080p low. The catch is 128-player Conquest, which runs noticeably worse on that same hardware purely from the added CPU load, so keep your expectations in check there.

No. Battlefield 6 is not available on Switch or Switch 2. PC, PS5, and Xbox Series X/S are the only platforms.

It is not confirmed as a launch title on GeForce Now, and the kernel-level anti-cheat that blocks Steam Deck also complicates most cloud setups. Check the service's own game list before counting on it.

It sits below the official minimum GPU, so expect a rough experience: around 40 to 50 fps at 1080p low, worse in big multiplayer fights. It'll launch, but it's not a comfortable fit for this game.

It's close to the minimum tier's real-world performance despite predating it, roughly 50 to 60 fps at 1080p low to medium. Usable, but you'll want to keep settings modest.

Yes, comfortably above minimum. Expect around 60 to 75 fps at 1080p medium to high, similar to a modern budget card despite its age.

Yes, above the minimum tier. Around 65 to 80 fps at 1080p medium to high settings.

Yes, roughly matching the official recommended tier. Expect around 75 to 90 fps at 1080p high.

Yes, comfortably above the recommended tier. Around 100 to 115 fps at 1080p high, and a reasonable 1440p card too.

Yes, well above recommended. Expect around 120 to 140 fps at 1080p high and strong 1440p performance, roughly 90 to 100 fps.

Yes, close to the higher end of what the game can use at 1080p and 1440p. Expect frame rates similar to an RTX 4070, since Battlefield 6 leans on CPU as much as raw GPU power at that tier.

Yes, above the recommended tier. Around 100 to 115 fps at 1080p high, with 1440p at high settings holding around 75 to 85 fps.

Yes, well into Ultra-tier territory. Expect around 150 fps at 1080p high and a strong 1440p experience near 110 to 120 fps.

Yes, it's the official Ultra-tier GPU. It targets 4K at 60 fps on ultra-balanced settings, or 1440p at 144 fps on high.

Yes, easily, with over 200 fps at 1080p high and strong 4K performance around 90 to 110 fps. On 128-player Conquest maps your CPU will still cap you before this card does.

Yes, it's the official recommended-tier AMD card. Around 90 to 100 fps at 1080p high and 65 to 75 fps at 1440p.

Yes, well above recommended. Expect over 130 fps at 1080p high and solid 1440p performance around 100 fps.

Yes, close to recommended-tier performance. Around 70 to 85 fps at 1080p high.

Yes, comfortably above recommended. Around 120 to 135 fps at 1080p high and roughly 90 fps at 1440p.

Yes, in line with the RTX 4060 Ti's real-world performance. Around 100 to 115 fps at 1080p high, more with DLSS 4 on.

Yes, comfortably into Ultra-tier range. Expect around 150 to 165 fps at 1080p high and strong 1440p numbers near 115 fps.

Yes, it's the card behind EA's unofficial Ultra++ tier, aimed at 4K 144 fps on high settings or 4K 240 fps on ultra settings using DLSS 4 Multi Frame Generation.

Yes, it's the fastest option available and clears every official tier with room to spare. In 128-player Conquest, though, your CPU becomes the ceiling well before this card does.

No. It's integrated graphics well below the RTX 2060 minimum, so Battlefield 6 will not run on it.

No, not at a playable frame rate. It's a strong integrated GPU for a handheld, but it still falls short of the RX 5600 XT minimum this game asks for.